
OPTOELECTRONICSOPTOELECTRONICSOPTOELECTRONICS
Purdy Electronics Corporation • 755 North Pastoria Avenue • Sunnyvale, CA 94085-2918
1
9/4/12
AND412HG
Ultra Bright LED Lamps: Type 3
AND412HG
InGaN High Intensity Blue Gree Light Emission
T-1 3/4 Package (5mm)
Features
• 5 mm (T1-3/4) Package
• Available on tape and reel
• Peak wavelength (λP = 505 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current: 1 to 20 mA DC
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power intensity — suitable for indoor/outdoor applications
• High reliability
• RoHS compliant
Maximum Ratings (Ta - 25 ºC)
Characteristic Symbol Rating Unit
Forward Current IF 30 mA
Reverse Voltage VR 5 V
Power Dissipation PD 120 mW
Operating Temperature Range T OPR -40 to 85 ºC
Storage Temperature Range T STG -40 to 100 ºC
Electro-Optical Characteristics (Ta = 25ºC)
Item Symbol Test Condition Minimum Typical Maxiumum Unit
Forward Voltage VF IF = 20 mA – 3.5 4.0 V
Reverse Current IR VR = 5 V – – 10 μA
Luminous Intensity IV IF = 20 mA 1,250 2,200 – mcd
Peak Emission Wavelength
λP
IF = 20 mA – 505 – nm
Spectral Line Half Width
Δλ
IF = 20 mA – 40 – nm
Dominant Wavelength
λd
IF = 20 mA 500 – 510 nm
Full Viewing Angle
2 θ 1/2
IV = 1/2 Peak – 12 – degree
Product specifications contained herein may be changed without prior notice.
I
Weight: 0.31g Unit: mm
Precaution
Please be careful of the following:
1. Dip soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Kommentare zu diesen Handbüchern